Input on my possible new setup

[strng1dah]

Here is what I am thinking of doing in the very near future. I would like any insight or criticism that you have. And yes, I will consider it to be constructive criticism. =)

DragIII or RevHard Stg2
310cc injectors
Arturbo 3" DownPipe
3" Thermal exhaust
3" Carsound cat
AVC-R
Vortech FMU w/ appropriate rise rate(not sure on this yet I may go with a Cartech 2020)
Tial Wastegate
The fuel pump that comes with the kit.

Let me know anything I may have forgotten, or that you would do differently. I know that an aftermarket ECU would be best, but I already have the injectors and the kits come with the FMU. What I plan on doing is lowering the idle fuel pressure by drilling the stock fpr and using a B&M CommandFlo. Basically I'm going to be doing what the JRSC guys who have 310s do to control fuel.

Thanks, Chris

------------------
2000 SC'd GSR
[email protected] best before the blower.
www.strng1dah.homestead.com

[JRCivic]

Doesn't sound like a bad list at all.
How much boost do you intend to run ???

------------------



'93 Civic Si H/B with B18C1, JRSC @ 8psi
Best 1320: 12.68 at 110 mph

[strng1dah]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by JRCivic:
Doesn't sound like a bad list at all.
How much boost do you intend to run ???

<HR></BLOCKQUOTE>

I'm thinking 7 daily and 12 when somebody needs a lesson in humility.

------------------
2000 SC'd GSR
[email protected] best before the blower.
www.strng1dah.homestead.com